New Product Coming
DAYS
HRS
MINS
SECS

VenusLiv V2 Support

Use the standard USB3.0 data cable to connect the camera to the computer. USB-C end: connect VenusLiv V2 camera USB-C OUT interface.USB-A end: connect the USB3.0 interface of the back panel of the computer (blue).

Lark C1 receiver can be inserted into the MIC interface on the side of the camera.

The LARK M1 receiver can be connected to the MIC IN/LINE IN interface of the camera by using 3.5mmtrs to TRS.
* This connection method is suitable for connecting other Microphones. Note that the microphone needs to be set to mono mode.

  1. Enter the “RTMP” software on the camera homepage.
  2. Click the + sign to add the push stream address.
  3. After setting the push stream code obtained from the corresponding live broadcast platform to the camera, the push stream address will appear in the address bar.
  4. Click “Start Live”, the camera will start to push the stream, and the picture will be pushed to the live platform.

* To use this function, the camera needs to be connected to an external network.