Configurations - Hollyland

All of them paird before shipping out from factory，need to pair again when we change the beltpack or add new beltpack.connect the base station and beltpacks by USB type-c cable, connect USB cable-> go to the manu of beltpack->select pair.

Reset the base station and pair again one by one.

It means someone with beltpack call back to the base station, short-press the “Remote Mic Kill” to release.

Long-press the side button of the beltpack.

Change the application mode as noise mode ,and adjust the mic gain in the beltpack settings.

MUTE means can only listen but can not talk, TALK means can listen and talk,LOST means disconncted.

300m in maximum between beltpack and base station.

4 pcs beltpacks with one set in maximum, with directional dynamic microphone

2 pcs by 4W cascade

Yes, it does

Yes, it does. 4W and talkback are line standard ports ,so it can be cascade via customized cable.

Yes,both of the electric and dynamic are supported. the model can be switched in beltpack settings

Yes，2 meters extended antenna is optional for Mar T1000

Mars T1000 Support

Q1: How to pair the beltpack and base station, when will we need to do?

Q2: How to change the ID of beltpacks?

Q3: What does it means when the "Remote Mic Kill" button in flashing red mode?

Q4: When the base station work at "Remote Mic Kill" mode , how to ask for release?

Q5: How to increase the volume for the headsets?

Q6: What does it means when the beltpack showing "MUTE","TALK" or"LOST"?

Q7: How far does it support with Mars T1000 ？

Q8: How many pcs beltpacks in one standard configuration, and what's the microphone type of headset ？

Q9: How many pcs Mars T1000 can be cascaded ?

Q10: Does the Mars T1000 support cascade with Solidcom M1?

Q11: Does the Mars T1000 support cascade with Syscom 1000T?

Q12: Does the Mars T1000 support cascade with ATEM via talkback port?

Q13: Does the Mars T1000 beltpack support electric headset？

Q14： Does the base station antenna support extended？