VenusLiv Air Support

Use the standard USB3.0 data cable to connect the camera to the computer USB-C end: connect VenusLiv Air camera USB-C OUT interface

USB-A end: connect the USB3.0 interface of the back panel of the computer (blue)

Lark M2 & VenusLiv Air

Lark M2 receiver can be inserted into the MIC interface on the side of the camera

LARK Max &VenusLiv Air

The LARK Max receiver can be connected to the MIC IN/LINE IN interface of the camera by using 3.5mmtrs to TRS

* This connection method is suitable for connecting other Microphones. Note that the microphone needs to be set to mono mode

  1. Use the UVC cable in the package to connect the camera to the computer, and open the HollyStudio APP (PC). The APP will automatically recognize and connect to the device.
  2. After adding functions and effects such as stickers, turn on the Moma Live Cam switch in the upper right corner of the menu bar to enable the virtual camera to output the picture.

3.Enter live streaming software such as OBS, add the corresponding video source, and then start live streaming by pushing the stream.

  1. Click the adjustment button on the camera screen.
  2. Two modes: Smart and PRO.
  3. The Smart mode supports the adjustment of contrast, sharpness, and saturation.
  4. The PRO mode supports the adjustment of more parameters, such as white balance, shutter speed, ISO, etc.
  5. It supports saving the currently set parameters as a preset template for quick setup next time.

After downloading the VenusCam APP, enter the APP and click “Connect Device”. The APP will then search for nearby devices. You can connect by clicking on the corresponding device.

Use the UVC cable in the package to connect the camera to the computer. Open the HollyStudio APP (PC), and the APP will automatically recognize and connect to the device. The APP supports functions such as image control, FOV control, texture mapping, beautification, and green screen.

Click the button in the upper left corner of the camera screen on the home page, and the mode selection interface will appear.There are three modes in total: UVC Streaming mode; RTMP Streaming mode; Shooting mode.

Color adjustment needs to be carried out in Venusliv Air or Hollyland Studio. After saving the color adjustment preset template, it can be called in the camera.

After pulling down the screen, enter the settings interface. Click on the ‘Information’ column, then enter the ‘Upload Logs’ column, and connect to the network to upload the fault logs.

After pulling down the screen, enter the settings interface. Click on the ‘Version’ column and then click “Check for Updates” to proceed with the upgrade.



US