Channel scanning for free channel selection or Active the auto channel selection
Correct installation.
Ensure that the power supply is stable.
Examine the HDMI cable for proper functionality: connect the camera directly to a monitor to verify if the video output is normal.
Use an HDMI output from a laptop to connect to the video transmitter. Observe if the transmitter screen displays the video format correctly.
With any Micro single/SLR camera, only one of the HDMI video output and the camera’s screen display can be enabled when you are recording 4K video because of the limitation of the camera itself. So you can try to set the shooting format as 1080. Photography cameras do not have this limitation.If you want to use a Micro single/SLR camera to record 4k video and monitor the shooting simultaneously, you can connect Camera->ATOMOS Recorder->Transmitter
Please configure the camera HDMI settings as below:
Change HDMI output format to 1080p/i (Not recording format)
Set HDMI Information Display to OFF
Set HDMI Control to OFF
The HDMI IN 1 port of the ATEM mini switcher only supports RGB mode, while HDMI IN 2, 3, and 4 support YUV mode. Our device supports YUV mode.
Please keep the mobile phone at least 2m away from the transmitter.