Interface & Installation

OVERVIEWS: Mars 4k has rich interface, this article shows the usage of all the interface for your reference.

Transmitter Connection

No.	Status	Detail
❶	Mirrorless camera	SONY, Canon, Fujifilm, Nikon and others
❷	Camera	Panasonic, SONY
❸	Professional video camera	ARRI、RED、SONY
❹	USB charger	The charger must be 5V2.5A or above, 5V1A/2A power supply is insufficient, and device will not work properly
❺	USB flash drive	Upgrade via USB C flash drive / USB flash drive+ Type C conversion
❻	1/4 Cold shoe	The device can be mounted on the hot shoe mount of the camera
❼	NP-F Battery	F970，F750，F550
❽	D-Tap adapter cable	Able to connected to V-Mount/G-Mount battery
❾	12V DC adapter	All Mars Series wireless transmission DC adapters are common

Receiver Connection

No.	Status	Detail
❶	Monitor	Small or large monitor are supported
❷	Switcher/director	BMD、SONY、Panasonic and other switchers are supported
❸	Video capVideo capture card/encoder	Supported by all capture cards
❹	USB charger	The charger must be 5V2.5A or above, 5V1A/2A power supply is insufficient, and device will not work properly
❺	USB flash drive	Upgrade via USB C flash drive / USB flash drive+ Type C conversion
❻	Tripod	The receiver (RX) must be on tripod, at least 1.7 meters high, to avoid obstruction
❼	NP-F Battery	F970，F750，F550
❽	D-Tap adapter cable	Able to connected to V-Mount/G-Mount battery
❾	12V DC adapter	All Mars Series wireless transmission DC adapters are common

Article Number: 【AS-220824001_6】