Product Name: Mars 4K

OVERVIEWS: Mars 4K has 8 channels, each country channel corresponds to a different frequency because of the country policy, just simply control rocker to switch current channel. Move the rocker button ❶ of Transmitter or Receiver ‘up’ or ‘down’ to switch channels, short press the rocker button ❶  to confirm to switch. Usually, switching the channel on the transmitter (TX)

OVERVIEWS: Mars 4K has built-in fan design, and it has 2 mode to adjust. Both Mars 4K transmitter and receiver have built-in fans for heat dissipation, and the fan can be adjusted. There are two fan settings, 【Automatic Mode】 and 【Silent Mode】. In silent mode, the fan is still turned on, but the noise of the fan

OVERVIEWS:There may some interference if the video get stuck, mosaic or snowflakes. Please refer to the steps below to troubleshoot. Note: If you need to do 4K live broadcast, you need to choose a 4K USB capture card, and only the HDMI ports of the transmitter (TX) and receiver (RX) support 4K30, the SDI port does

1. Kindly Note 2. Updating Tool 1. Prepare a small USB disk(16/32G), then format it to FAT32. 2. Download all the upgrade files to the USB disk root directory (It will recognize automatically to upgrade) 3. Connect the USB disk to the device, it will do the upgrade automatically after turning the device on 4.

OVERVIEWS: The methods of how to install multiple sets of Mars 4K will be shown in the below article.

OVERVIEWS: Mars 4K has 3 power methods, here show you the power methods and something you should know when power supply. There are 3 ways able to power Mars 4k, NP-F batterys, DC(6-16V), USB-C (5V 2.5A) Note:         Power by USB-C the charger must be 5V 2.5A at least; Article Number: 【AS-220827001_1】

OVERVIEWS: Mars 4K supports up to 4 APP connection, at this part showing you how to connect the Hollyview APP.  Please download 【HollyView】 App first on your smartphone App Store and Make sure your smartphone supports the 5G WiFi network.  Below are the detailed steps to do the App Connection: Note: It is suggested to turn off

OVERVIEWS: Mars 4K can input and output fractional / decimal video format, but the HDMI IN and SDI IN will be different. 1. Fractional frame rate video format input from HDMI, Video format will be recognized as integer frame rate（such as input 23.98 will be 24） 2. Fractional frame rate video format input from SDI, both

OVERVIEWS: Mars 4K transmitter can pair up to 2 receivers, just need to buy another receiver and pair it to the transmitter. Need to purchase a separate receiver as a second receiver. Article Number: 【AS-220827001_2】

OVERVIEWS:Mars 4K supports up to 4 APP connection, at this part showing you how to connect the Hollyview APP.  Only HDMI interface support 4K input (Up to 4k30), must be input 4K30 to HDMI of Transmitter, and output from HDMI of Receiver, SDI will only output 1080p, does not support 4K30. Note: Article Number: 【AS-220827001_6】

OVERVIEWS:When connect to your PC or other control device but can’t contorl the camera. Long press the receiver (RX) rocker button ❶ to enter the advanced menu, select ‘Scan’❷, wait for about 10 seconds, the receiver will display the channel scan result❸. Red means the channel has interference, please do not use it,  Green means the channel can be used.  Article Number: 【AS-220824001-4】

OVERVIEWS: Mars 4K supports Hollyview APP connection, just download Hollyview APP on APP Store and use your phone connect Transmitter wifi to review on your phone. Article Number: 【AS-220827001-8】