They are paired before shipping out from the factory. Pairing is required when you change a beltpack or add a new beltpack. Simply connect the beltpack to the base station using a USB-C cable and select Pair on the beltpack.
You can set it via the Solidcom app or web page.
Turn off the Denoise function in the beltpack settings (this function can be disabled in a quiet working environment).
Step 1: Download the Solidcom app.Step 2: Connect a control device (like iPhone) to the Solidcom M1 base station in the same LAN. (Connect the devices via Wi-Fi directly or connect them to the same network by router)Step 3: Open the Solidcom app to perform settings.
Set the base station to Master mode from the front panel.
