Cosmo C2 Support

1. Long press the side button of the transmitter to enter the menu;Long press the middle button of the receiver to enter the menu.
2. Select “Pairing” on both the transmitter and receiver, then confirm.
3. Wait for pairing to complete.

PS:The Cosmo C2 supports only 2 transmitters and 1 receiver. The first transmitter paired with the receiver is TX A, and the second transmitter is TX B.

1.Swip down or up the side button of the TX can change the channel(swip down channel -,swip up channel +).
2.Use the left or right button of the RX can change the channel(left button channel -,right button channel +).
3.When the channel set in Auto,confirm the setting,when the product meet some interterence,it will change the channel automatically.

1.Long press the side button of the TX to enter the menu;Long press the middle button of the RX to enter the menu.
2.Find the Fan,there are 2 modes:Auto and Low.

Auto: The device automatically adjusts the speed of the fan according to its temperature (noise up to 55dB).
Low: The fan speed is reduced to a minimum (45dB), and the temperature of the device will be slightly higher.

Cosmo C2 is not compatible with Mars or Pyro series.

Cosmo C2 is not compatible with Cosmo C1.



US