Q1 How to enter the professional mode?

1. Click on the floating ball on the screen, enter the toolbox, and select the scene function in the toolbox;
2. In the upper right corner of the scene menu, select the professional mode to enter and adjust the camera parameters;

Q2 Professional mode within how to quickly adjust the screen brightness?

1. After entering the professional mode, click the parameter [EV];
2. Adjust the [EV] value: adjust to the right, the value increases, and the brightness increases; Adjust to the left, the value decreases, and the brightness decreases;

Note: the EV value can only be adjusted when either ISO or shutter is set to auto

Q3 Professional mode how to advance fine adjustment screen brightness?

1. After entering the professional mode, select the parameters to be adjusted;
2. Adjust the [ISO] value; The lower the value, the lower the brightness; In the case of sufficient scene lighting, the lower the ISO value, the better the picture quality
3. Adjust [Shutter] The larger the value, the longer the shutter time, and the higher the brightness of the screen; The smaller the value, the shorter the shutter time, and the lower the brightness of the screen
4. Adjust [Aperture] The larger the value, the smaller the amount of light, and the lower the brightness of the screen; The smaller the value, the more light, and the higher the brightness of the screen

Note: The ISO value should not be set too high, which will easily cause noise on the screen. It is recommended that the ISO value should not exceed 320

The shutter selectable value is associated with the live frame rate selection, and the shutter parameter can only select a multiple of the live frame rate.

For example, if the current live broadcast frame rate is 30fps, the current shutter can select 1/30, 1/60 and 1/120

Q4 How to set the focus mode?

1. Click on the floating ball on the screen –> Select “more settings”
2. Adjusting within the focus mode options
3. Single auto focus (AF-S): manually click the Focus frame to trigger an auto focus, and fix the focus position after the focus is clear
4. Continuous Interrupt Focus (AF-C): Continuously detect the change state of the object in the Focus frame before and after, and continuously trigger auto focus

Note: If the person or product in the picture does not move back and forth frequently, you can choose to AF-S a single autofocus to prevent the focus of autofocus from being non-people.

Q5 How to achieve remote switching save good camera parameters of the scene?

1. Save the preset Pictures/parameters of the camera: click the floating ball on the screen-> scene-> save the custom scene
2. The wireless Bluetooth receiver of the keyboard is plugged into the USB-A interface on the camera
3. Click the floating ball on the screen-> More Settings-> keyboard hotkeys-> select the set scene-> click any key on the keypad to set the shortcut key for the scene
4. After exiting, you can use the Bluetooth keypad to switch scenes