Solidcom H1 Wireless Intercom System Support

A single POE port on the central station can power three antennas at the same time.

Each central station can cascade up to 8 antannas.

The fiber optic type requires the use of single-mode fiber, with lengths reaching up to several kilometers.

1. Connect the computer to the LAN port of the central station via a network cable. 2. Change the computer’s network port IP to one within the same subnet as the central station.

2. Change the computer’s network port IP to one within the same subnet as the central station. （1）Enter the computer settings.

（2）Find Network Settings

（3）Select Ethernet, right-click the mouse and choose “Properties”.

（4）Click the Internet协议版本4（TCP/IPV4）

（5）Select “Use the following IP address,” enter an IP address within the same subnet as the central station (the last digit must differ from the central station’s IP, ranging from 0 to 255; the central station’s current IP is: 192.168.218.10) and the subnet mask. The subnet mask must match that of the central station.

3. Open your computer browser and enter the IP address informations under LAN & SFP Port Settings in the wired network configuration (default: 192.168.218.10) to access the Web page (default password: 12345678).

  1. Connect your computer to the central station’s Wi-Fi (the Wi-Fi name can be found in the central station’s: Menu -> Network Settings -> Wi-Fi & Bluetooth Settings). No password is required; connect directly.

  1. Open your computer browser and enter the IP address in Wi-Fi & Bluetooth Settings (default: 192.168.216.10) to access the Web page (default password: 12345678).



US