Solidcom H1 Wireless Intercom System Support

Switch cascading requires the use of switches supporting the PTPv2 end-to-end (abbreviated as e2e) clock synchronization protocol. Switches without this protocol can be cascaded but do not support roaming.

IP Cascading: CAT.5e cable 100m, CAT.6e cable 150m4WIRE Cascading: CAT.5e cable 300m

  1. Enter the menu, find Network->Wi-Fi & BT, and turn on Wi-Fi & Bluetooth.
  2. Tap the “+” icon in the upper-right corner to add a device.
  3. Turn on Bluetooth on your phone and select Next.
  4. Add the device you wish to connect from the list of available devices found.



US