21 Best Wireless Microphones for Interviews in 2024

It’s no surprise that wired mics are difficult to handle, especially when your content is about asking questions from people. That is why creators prefer the best wireless microphone for interviews because of their ease of use and fascinating features. But let’s face the fact! Not all wireless mics are capable of recording sound in high quality. 

And since the market is full of low-grade, heavily marketed products, it becomes challenging to pick the right wireless device to record interviewees. So, in this article, you will explore 21 wireless interview microphones tried and tested by several users. You will also learn how to select the right equipment without wasting your money. 

Comparison Table – 21 Best Wireless Microphones for Interviews

ProductPriceWeightPolar PatternWireless ConnectivityWireless RangeBattery LifeCharging TimeCompatibilityInterference ResistanceFrequency  ResponseMic SensitivitySignal-to-Noise  Ratio
Hollyland Lark M2$179.00 (Combo version)TX:9 grams
RX:6 grams (mobile version)/14.8 grams (camera version)
Omnidirectional2.4GHz AFH1000ftTX: Up to 10 hours
RX: Up to 9 hours
Up to 1.5 hoursCamera, mobile, and laptop/PCAFH and LDS20Hz to 20kHz-37dBV +/- 2dB @ 1 KHz> 70dB
Hollyland Lark M1 (Duo version)
$149.00
TX: 11.8 grams
RX: 17.5 grams
Omnidirectional
2.4Ghz AFH

650ft
TX and RX: 8 hoursTX and RX: 1.5 hoursCamera, mobile, and laptop/PCAFH and HearClear Noise Cancellation20Hz to 20kHz
N/A

65dB
Hollyland Lark Max$249.00TX:33 grams
RX:60 grams
Omnidirectional2.4GHz AFH820ftTX: Up to 7.5 hours
RX: Up to 9 hours
Less than 2 hoursCamera, smartphone, and laptop/PCAFH and DSP20Hz to 20kHz-36dBFS +/- 1dB @ 1 kHz70dB
Rode Wireless Go II$284.89TX:30 grams
RX:32 grams
Omnidirectional2.4GHz656ftTX/RX:

7 hours
2 hoursCamera, smartphone, and laptop/PC128-bit Encryption20Hz to 20kHz22dBAN/A
DJI Mic 2$349.00TX/RX:28 gramsOmnidirectional 2.4GHz and Bluetooth820ftTX: 6 hours (approx)Up to 1.5 hoursCamera, smartphone, and laptop/PCN/A50Hz to 20kHz

and
20Hz to 20kHz
N/AN/A
Shure MoveMic$499.00TX:8.2 grams
RX:81 grams
Omnidirectional Bluetooth 5.0 LE98.4ftTX: 8 hours N/ACamera, smartphone, laptop/PC, and tabletN/A50Hz to 20kHz-37dBFS100dB
Synco G2A2$99.00TX and RX: 39 gramsOmnidirectional 2.4GHz656ftTX and RX: 8 hours2 hoursCamera, smartphone, and laptop/PCSyncoderTM,  DSP, and FHSSN/AN/AN/A
Comnica VM30$169.00TX:29 grams
RX:93 grams
Supercardioid2.4GHz Hybrid328ftTX: 7 hoursN/AMirrorless camera, DSLR, audio recorder, smartphone, and tabletN/A20Hz to 20kHz-86dB75dB
Godox WEC$99.00TX: 12 grams
RX: 16 grams
Omnidirectional 2.4GHz AFH656ftTX and RX: 8 hoursUp to 2 hoursCamera, smartphone, tablet, and laptop/PCAFH20Hz to 20kHzN/AN/A
Saramonic Blink 500 ProX B2R
$229.00
TX: 29.5 grams
RX: 30.5 grams
Omnidirectional 2.4GHz Digital328ftTX: 8.5 hours (approx.)
RX: 10 hours (approx.)
N/AiPhones, Android smartphones, computers, cameras, and audio mixersN/A20Hz to 20kHz-20 to -42dBV84dB
MOVO WMX-1$79.95TX and RX: 47 gramsOmnidirectional 2.4GHz200ftTX and RX: 6 hours on AAA batteriesN/ACamera, camcorders, DSLRs, tablet, and smartphoneRF Chipset35Hz to 14kHz-30dB84dB
SmallRig Forevala W60N/AN/AOmnidirectional2.4GHz328ftTX and RX: Up to 8 hours Up to 1.5 hoursSmartphone, camera,  and PCDSPN/AN/AN/A
RODE Interview Pro$249.00Handheld mic: 250 gramsOmnidirectional2.4Ghz656ftUp to 25 hoursN/ACameras, computers, smartphones, and RODE Pro II/Duo128-bit encryption20Hz to 20kHzN/A74dB
MAYBESTA WM350$20.79TX: 20 gramsOmnidirectionalBluetooth50ft – 65ftTX: 4.5 hours
TX: 2 hoursiPhones and iPads (with lightning connectorsDSPN/AN/A80dB
Boya BY-XM6-S2$169.95N/AOmnidirectional2.4GHz328ftTX and RX: 7 hours
N/ACameras, laptops, iPhones, iPads, and Android devicesN/A35Hz to 18kHzN/AN/A
Movo WMX-2 Duo$119.95TX and RX: 31 gramsOmnidirectional2.4GHz328ftTX: 7 hoursN/ASmartphone, mirrorless, and DSLR camerasN/A35Hz to 18kHz-39dB84dB
Leettus 2Pcs (K3)$15.98N/AOmnidirectionalN/A65ftTX: Up to 7 hoursN/AiPhones and iPads (with lightning connectors)N/A20Hz to 20kHzN/A68dB
Ulanzi V6$39.95TX: 8 grams
RX: 16 grams
Omnidirectional2.4GHz164ftTX: 6 hours
RX: 10.5 hours
TX: 1.3 hours (approx.)
RX: 2 hours
Cameras, iPhones, Androids, iPads, and TabletsAnti-interference Chip20Hz to 20kHzN/A64dB
Caiord J6$49.99N/AOmnidirectional2.4GHz165ftTX and RX: Up to 6 hoursN/ACameras, iPhones, Androids, and  iPadsDSP and Smart Noise Cancellation ChipN/AN/A60db
Rythflo LM02$89.99N/AOmnidirectional2.4GHzN/ATX: 6 hoursN/AiPhone, Android, iPad, and Tablet
N/A20Hz to 20kHzN/A65dB
Hohem MIC-01$109.00 – $119.00TX: 14.9 grams
RX: 5 grams
Omnidirectional2.4GHz328ftTX and RX: 7.5 hoursTX and RX: 1.5 hoursiPhones and Android phonesN/A20Hz to 20kHz-38dBFS64dB

Note: The manufacturers and store owners have the right to change the price. 

21 Best Wireless Microphones for Interviews – Features, Pros, and Cons

If you enjoy high-quality audio when recording interviews, these 21 wireless interview microphones can make your subjects sound more interesting on screen. 

1. Hollyland Lark M2

image 523

The Hollyland Lark  M2 is a wireless button microphone system, having two transmitters (TX) and one receiver (RX). It is an all-in-one audio recording solution for various requirements, including interviews. Despite mesmerizing features, this wireless mic is available at an affordable pricing range and offers a simple interface for content creators. The mic comes equipped with anti-interference features and functions on 2.4GHz Adaptive Frequency Hopping or AFH wireless technology. 

Despite its tiny size and hassle-free setup, the Lark M2 records high-quality sound at a 48kHz sample rate and 24-bit bit depth. Moreover, the device can transmit signals up to 1000 feet. Each TX unit includes an omnidirectional built-in microphone that can eliminate environmental noise. 

The Hollyland Lark M2 is available in different versions, including a camera, USB-C, Lightning, and a combo (includes all types of receivers found in the other versions). The TX units automatically pair with the RX without a sweat. Moreover, this microphone kit comes with several useful accessories, including cables, clip magnets, and windscreens. 

The Hollyland Lark M2 wireless mic can record interviews for up to 10 hours over a single TX charge. If you use the TXs from the fully charged case, you can record audio for 40 hours (approx). Additionally, the Lark M2 features the Laser Direct Structuring (LDS) antenna that cancels out human body interference for stable transmission. Also, the TX and RX units are designed with metallic mesh that protects the kit from debris and other interferences, such as infrared, RFI, and 2.4G. 

Key Specifications of the Hollyland Lark M2

  • 9 grams TX weight
  • 6 grams RX weight (mobile version)
  • 14.8 grams RX weight (camera version)
  • 2.4GHz AFH wireless technology
  • Up to 1000ft wireless range
  • TX battery life of up to 10 hours
  • RX battery life (all versions) of up to 9 hours
  • Up to 1.5 hours of charging time (TX and RX)
  • AFH and LDS interference resistance
  • 20Hz to 20kHz frequency response
  • -37dBV +/- 2dB @ 1 KHz mic sensitivity
  • > 70dB signal-to-noise ratio

Pros

  • Instant playback without removing the RX unit 
  • Effortless connectivity with a wide range of recording devices
  • Superb audio quality even without using the noise cancellation feature
  • The microphone feels featherlight when worn as a necklace or clipped to clothing

Cons

  • No real-time monitoring

Price

  • $179.00 (As seen on Amazon)

2. Hollyland Lark M1 (Duo Version)

Hollyland Lark M1 Duo - Top Choice

Where to Buy

Hollyland Lark M1 Duo is a lightweight lavalier interview microphone with wireless technology to capture voice in the highest quality. Lark M1 Duo is the best wireless microphone for interviews that is user-friendly and comes with one receiver and two transmitters. The 3.5mm jack lets you connect the receiver to your device while attaching the transmitters to the interviewer and interviewee. 

The case charges and holds the receiver and transmitters, so the batteries are juiced up for the next interview session. Setting up Hollyland Lark M1 wireless interview microphone also takes less than a minute. All you need to do is remove the transmitters from the charging case, and they are automatically turned on. 

The two separate buttons on the transmitters make Lark M1 the best wireless microphone for interviews. One is used to turn them off/on, and the second button allows you to pair them with the receiver. And this same button can also be used for noise cancellation. 

You can make a single press to turn on the noise cancellation. At the same time, holding this button enables pairing or re-pairing the transmitters to the receiver (in case the connection is lost).

Key Specifications of the Hollyland Lark M1

  • 110dB SPL
  • Type C – USB port
  • 8-hour recording time
  • 1.5 hours required charging time
  • 650ft voice recording range
  • Omnidirectional microphone
  • 16bit/48kHz HiFi recording quality
  • 3-level volume preset (low-mid-high)
  • 2.4GHz wireless transmitting frequency

Pros

  • The mic has effective noise reduction 
  • You experience negligible sound latency
  • Available in single transmitter version
  • Wide compatibility with smartphones and DSLRs

Cons

  • You need to remove the smartphone case to attach the receiver (only in some brands)

Price

  • $149.00 (As seen on Amazon)

3. Hollyland Lark Max

image 524

The Hollyland Lark Max was launched in 2023 and is still one of the most iconic wireless microphones admired by interviewers, podcasters, streamers, and vloggers. Since the device works on 2.4GHz AFH and DSP technology, it functions smoothly to provide enhanced audio quality with reduced undesirable noise.  

What makes Lark Max better than the other wireless mics is the inclusion of MaxTimbre technology. This feature ensures your subjects’ voice recordings are captured cleanly. Moreover, the technology eliminates all unnecessary sounds and improves the overall performance through its vibration-isolation and wind-proof characteristics. 

The Hollyland Lark Max records sound with amazing clarity due to the 48kHz/24-bit sample rate and bit depth. This means that Lark Max can capture every minor detail of your interviewee’s voice without changing the natural tone. Furthermore, this wireless mic can handle loud sounds within the range of 128dB without adding distortion to the quality. Contrarily, its 70dB signal-to-noise ratio, and omnidirectional microphones ensure picking up sounds as low as whispers. 

Another fascinating feature is the Lark Max’s ability to reduce surrounding noises with its Environmental Noise Cancellation technology. When the ENC mode is turned on, you can relax and record interviews even in noisy environments. If you’re worried about the battery timing in case of long interviews, don’t be! Each TX unit has a battery life of 7.5 hours and the RX can work for up to 9 hours when fully charged. Using these two units with a fully charged case can extend the battery to 22 hours. 

Key Specifications of the Hollyland Lark Max

  • 33 grams TX weight
  • 60 grams RX weight (
  • 2.4GHz AFH wireless technology
  • Up to 820ft wireless range
  • TX battery life of up to 7.5 hours
  • RX battery life of up to 9 hours
  • Less than 2 hours of charging time (TX and RX)
  • AFH and DSP interference resistance
  • 20Hz to 20kHz frequency response
  • -36dBFS +/- 1dB @ 1 kHz mic sensitivity
  • 70dB signal-to-noise ratio

Pros

  • Remarkable build quality
  • The setup is quite easy even for the beginners
  • This wireless microphone supports all major cameras and smartphones
  • Outstanding sound quality for professional interview sessions and videography

Cons

  • The TX and RX units are a bit bulky

Price

  • $249.00 (As seen on Amazon)

4. Rode Wireless Go II

image 525

The Rode Wireless Go II wireless microphone is designed for reporters, vloggers, podcasters, and anyone who needs next-level audio without worrying about tangled cables. This microphone kit includes two TX mics and one RX. You can use the receiver to store audio in its internal memory. Or you can directly connect it to a camera, smartphone, or any recording equipment to enjoy great sound that is better than most built-in microphones. 

With a user-friendly interface, the Rode Wireless Go II offers several necessary features that improve audio recordings. Additionally, this microphone provides levels for gain adjustment so you can fine-tune sound to save time in post-production.

The Rode Wireless Go II’s transmitters can be easily clipped on the subject’s clothing. Both TX units are notably small and weigh around 30 grams. The receiver can effortlessly link with DSLRs too. Also, each TX includes omnidirectional transducers that can capture audio frequencies ranging from 50 Hertz to 20,000 Hertz. This wireless microphone can transmit signals up to 656 feet. Plus, the TX units have an LED display that shows battery life and connectivity status.

Additionally, the omnidirectional microphones are protected through a grille and there is also a 3.5mm connection for attaching external lavalier mics. You can charge the units by connecting the charger to the USB-C port. Most importantly, the Rode Wireless Go II utilizes 2.4GHz wireless technology backed by 128-bit encryption. This makes the system work enormously well under environments with high radio frequencies without interferences. 

Key Specifications of the Rode Wireless Go II

  • 2.4GHz digital wireless technology
  • Approx. 30 grams TX weight
  • Approx. 32 grams RX weight
  • 656ft wireless range
  • TX and RX battery life of up to 7 hours
  • 2 hours of charging time (TX and RX)
  • 20Hz to 20kHz frequency response
  • 22dBA mic sensitivity 
  • Omnidirectional polar pattern
  • +20dB gain range
  • Up to 4 milliseconds latency

Pros

  • Excellent audio quality
  • It has a compact body
  • The microphones have separate channels
  • This wireless mic offers built-in memory for audio recordings

Cons

  • You need to have multiple USB cables to charge the units
  • The firmware updates and initial setup can be puzzling for new users

Price

  • $284.89 (As seen on Amazon)

5. DJI Mic 2

image 526

The DJI Mic 2 provides a wireless solution for people like social media personalities, vloggers, and content creators who aim to improve their audio quality. The package includes two microphone transmitters and a single receiver, placed inside a durable charging case. 

Besides, the box comes with useful accessories for connecting this microphone with numerous recording devices, including smartphones, DSLRs/cameras, and PCs. This is an upgraded kit of the previous DJI Mic with lots of powerful features, including long battery life, better user experience, and noise reduction functionality, so you can record crystal-clear audio when shooting interviews in diverse environments.

Opting for the full DJI Mic 2 gives you two TXs, one RX, two mobile adapters (USB-C and Lightning), two windshields, and two magnetic clips. Appearance-wise, the units are designed in a way that resembles mini pages with the company’s logo at the front and a clip with a magnetic attachment at the back. The TX units have a 3.5mm jack to connect an optional lavalier microphone. 

Unlike the previous model, the DJI Mic 2 includes a dedicated recording button and a USB-C port on the left side. These connections are designed carefully and do not interfere with the Bluetooth pairing button to safeguard against accidental touch. The DJI Mic 2 offers a wireless range of up to 820 feet using dual connectivity options (Bluetooth and 2.4GHz). 

Key Specifications of the DJI Mic 2

  • 28 grams TX and RX weight
  • 2.4GHz and Bluetooth wireless connectivity
  • 820ft wireless range
  • Approx. 6 hours of battery time (TX)
  • Requires 1.5 hours of charging time
  • Omnidirectional microphone
  • 50Hz to 20kHz / 20Hz to 20kHz dual frequency response

Pros

  • Vibration indicators on the TX 
  • The microphone has a durable build quality
  • Highly effective noise-canceling feature
  • 32-bit float onboard recording that captures detailed audio with remarkable fidelity

Cons

  • Some users complain that DJI Mic 2 is not compatible with Windows 11

Price

  • $349.00 (As seen on Amazon)

6. Shure MoveMic

image 527

The Shure MoveMic wireless microphone is made for conducting 2-persons interviews. That is why, this model attracts many creators and journalists seeking marvelous audio recordings. The MoveMic has various qualities and goes with tablets, smartphones, cameras, and laptops. Shure claims to make this model by keeping portability in mind, adding lightweight components in the TX. Nevertheless, the receiver appears to be bulky. 

The Shure MoveMic also has an excellent battery life and can also be used with numerous audio recording apps when used with mobile devices. The 2-person kit features 2x wireless lavalier transmitters/microphones, a MoveMic receiver, a 3.5mm cable, USB-C cables, and a charging case. All these components have a semi-matte, highly attractive, black finish. 

Also, the design of the transmitters is unique, as each microphone has an oval shape with a rounded head and attachment clip on each end. The microphone comes with an IPX4 rating that ensures resistance against minor water splashes and rain. However, you cannot connect additional lavalier mics to the TX since the unit lacks a 3.5mm port. But guess what?  You don’t need one because the TX units provide impressive audio quality, eliminating the need for external mics. 

Also, the Shure MoveMic offers a wireless range of 98.4 feet and uses Bluetooth wireless connectivity. The transmitters also have a good battery life of up to 8 hours on a single charging cycle.

Key Specifications of the Shure MoveMic

  • 81 grams RX weight
  • 8.2 grams TX weight
  • Bluetooth 5.0 LE wireless connectivity
  • 8 hours of TX’s battery life
  • Up to 98.4ft of wireless transmission range
  • 50Hz to 20kHz frequency response
  • -37dBFS mic sensitivity
  • 100dB signal-to-noise ratio
  • Omnidirectional microphone

Pros

  • MoveMic has a long battery life
  • Exceptional audio recording quality
  • Simple setup without any challenging configurations

Cons

  • It has a heavy receiver
  • You will have to purchase the RX unit separately, which makes the kit pricey
  • Despite a high-priced wireless mic, it offers a short wireless range compared to alternatives

Price

  • $499.00 (As seen on  Amazon)

7. Synco G2A2

image 528

The Synco G2A2 is a 2-person wireless mic system with a bright TFT display that shows all important information. The microphone uses the latest patented technology to deliver crystal-clear audio over 2.4GHz wireless technology. The kit comes with two transmitters and one receiver that permits audio recording from two different sources at the same time, making it perfect for indoor and outdoor interview recordings.

The Synco G2A2 comes with a SyncoderTM transmission algorithm to improve signal stability within the wireless range of up to 656 feet. Plus, the system is equipped with a Frequency Hopping Spread Spectrum (FHSS) that automatically identifies and sets the TX and RX units to reliable frequencies to make sure there are minimal signal conflicts and increased privacy. But that’s not it! G2A2 also includes a DSP chip for signal enhancement. 

The Synco G2A2 takes away the pain of turning off the transmitters every time you need to go unscripted during the interview. With a dedicated button, you can quickly mute the transmitters when setting up the device or talking to your colleagues. Moreover, the TX and RX units have a six-level gain adjustment control with a one-press noise reduction function to cater to various recording environments. 

Next, the Synco G2A2 permits the charging of both TXs and RX simultaneously through a single charging source. You can use this wireless microphone for 8 continuous hours by charging the kit for just 2 hours. 

Key Specifications of the Synco G2A2

  • 2.4GHz wireless technology
  • 656ft wireless range
  • 20ms audio latency
  • 8 hours of battery time (TX and RX)
  • 2 hours of charging time (TX and RX)
  • Omnidirectional polar pattern
  • 39 grams TX and RX weight

Pros

  • It has a long-lasting battery time of the transmitter units
  • The kit is incredibly compact and lightweight
  • All essential accessories are included in the package
  • User-friendly controls and a very informative display

Cons

  • The receiver’s battery dies faster than the transmitter

Price

  • $99.00

8. Comica VM30

image 529

In the world of lav-styled mics, the Comica VM30 shines as a shotgun wireless microphone. Its transmitter can be used in wireless and wired modes and comes with a 3.5mm TRS and TRRS auto-recognition output along with a USB Type-C connectivity for digital and analog recordings. Both transmitter and receiver include a display to help you monitor the wireless connection status, battery life, and audio mode in real time. This wireless mic kit can send audio signals to up to 328 feet. The package comes with different cables to make this microphone work with audio recorders, mobile phones, audio recorders, DSLRs, and mirrorless cameras.

The Comica VM30 operates on 2.4GHz technology. Each TX unit has a supercardioid mic that captures clear audio of the interviewee while ensuring minimal background noise. The device provides a 48kHz and 24-bit audio resolution to ensure high-quality audio recordings. Upon peeking more into the technical details, the Comica VM30 has two options for a low-cut filter, including 75Hz and 150Hz that improves the quality of high-frequency sounds. There’s also a gain control dial for gain adjustment up to +12dB. 

When using the Comica VM30 in wireless mode, the system stays functional for up to 7 hours. Whereas you can enjoy a runtime of up to 50 hours when the mic is connected to your smartphone or PC through USB-C. 

Key Specifications of the Comica VM30

  • 29 grams RX weight
  • 93 grams TX weight
  • 2.4GHz hybrid analog/digital wireless connectivity
  • 328ft wireless range
  • TX battery life of up to 7 hours
  • 20Hz to 20kHz frequency response
  • -86dB microphone sensitivity
  • 75dB signal-to-noise ratio
  • Supercardioid polar pattern

Pros

  • The mic has a durable build quality
  • It has a simple plug-and-play functionality
  • Due to supercardioid TXs, this microphone captures the focused sound
  • Dual recording options for additional user convenience

Cons

  • Unfortunately, the wireless RX does not work with the digital output
  • The microphone clip overshadows other ports when not correctly positioned

Price

  • $169.00 (As seen on Amazon)

9. Godox WEC

image 530

The Godox WEC can reform your content game, especially if you’re into the street interview niche. This pair of TX and RX can also be good for other recording needs, including daily vlogs and live streaming sessions. Both units are lightweight and can be easily clipped all day without putting extra weight on your subject’s clothing. But it is not the convenience the WEC offers. This wireless mic delivers outstanding performance and lossless audio reproduction through stereo and mono recording modes. 

The Godox WEC faithfully captures every nuance of sound at a high audio sample rate of 48kHz and 16-bit bit depth. Plus, this kit incorporates the Dynamic Nose Reduction feature that effectively reduces unwanted background noises so you can experience professional-grade audio recordings.

The Godox WEC possesses a strong wireless transmission that covers a distance of up to 656 feet without losing audio quality, even in larger environments. Moreover, this microphone provides +/- 6dB gain adjustment to help you fine-tune the levels according to your recording condition.

Key Specifications of the Godox WEC

  • TX weight approx. 12 grams
  • RX weight approx. 16 grams
  • 2.4GHz AFH wireless technology
  • 656ft wireless range
  • 8 hours of battery life (TX and RX)
  • 2 hours of charging time (TX and  RX)
  • 86dB dynamic range
  • Omnidirectional polar pattern
  • 110dB Max SPL
  • 20Hz to 20kHz frequency response

Pros

  • Very lightweight and compact design
  • Best for recording interviews on streets and crowded places
  • You can record two people at the same time

Cons

  • You cannot switch channels if you experience interference
  • The system lacks the inclusion of the latest technology that reduces the overall performance
  • A few users have complained that this microphone is not compatible with USB-C devices and may not even work with adapters

Price

  • $99.00 (As seen on Amazon)

10. Saramonic Blink 500 ProX B2R

AD 4nXcOsWlTD9WL7mBMvdvczXFOFuU3BoGhMpELB9oGEVW8Nypz4CndieP2W S7lZspebeheNtEOzqGqYnqVG3rYNNw3JSvRePnaahVCLzWsvYSQT7hx2of5TvSntHpPEsIo8 0Dx34yApxbxi8WjcdX Anzck?key=UYjKRXyp1uNsCG8MnLzE0Q

Those who admire the functions of the previous Blink 500, will surely appreciate this upgraded version. And if you’re new to the Saramonic Blink 500 ProX B2R, here’s your chance to learn more about this magnificent wireless microphone.  

The Blink 500 ProX B2R is a wireless TX and RX kit for two people. Its 8GB onboard memory, which lasts around 15 hours, allows you to record continuously. The mic also offers promising sound quality when used with a wide range of cameras, DSLRs, tablets, computers, and smartphones (iOS and Android). Therefore, it has multiple applications, including interviews, vlogging, and live streaming.

The mic is highly user-friendly and picks up 360-degree sound through its omnidirectional polar pattern. The TX units are small enough to clip on your clothing. Contrarily, you can use them as a beltpack TX and attach external lavalier microphones. The package comes with two 3.5mm cables (3.5mm TRRS and 3.5mm TRS), making this wireless kit compatible with most recording gadgets.

The Saramonic Blink 500 ProX B2R delivers audio wirelessly with minimal latency. The mic offers a wireless range of up to 328ft (100 meters). The TX has a battery life of up to 8.5 hours, and the RX has a runtime of 10 hours. The RX unit has a clean OLED display with different Mono and Stereo audio settings. There’s also a headphone output for real time sound monitoring. 

Key Specifications of the Saramonic Blink 500 ProX B2R

  • 29.5 grams TX weight
  • 30.5 grams RX weight
  • Omnidirectional polar pattern
  • Digital 2.4Ghz wireless connectivity
  • 8.5-hour (approx.) TX battery life
  • 10-hours (approx.) RX battery life
  • 20Hz to 20kHz frequency response
  • -20 to -42dBV mic sensitivity
  • 84dB signal-to-noise ratio

Pros

  • The OLED has a bright and easy-to-read display
  • All controls on the TX and RX have clear labeling to ensure user-friendliness
  • 6x adjustable gain levels on the TX for attaining remarkable audio quality

Cons

  • The included lav mics are not high-quality
  • Some users may find difficulty in reading the serif font on the OLED display
  • According to Amazon reviews, you need to use an adapter and a dedicated audio recording app to savor the optimal sound

Price

  • $229.00 (As seen on Amazon)

11. MOVO WMX-1

image 532

The MOVO WMX-1 is another kid on the block that comes under the $100 price range. This wireless lavalier mic claims to provide studio-quality recordings and reliable connectivity. WMX-1 is compatible with all recording equipment, including camcorders, DSLRs, tablets, and smartphones, and is capable of reproducing distortion-free and clean sound. The device is perfect for interviewers, vloggers, mobile journalists, filmmakers, and content creators. 

The system comes equipped with 2.4GHz wireless frequency with an RF Chipset to ensure regulation-free and interference-free transmission of up to 200 feet. Unlike most brands in this list, the MOVO WMX-1 offers real time audio monitoring through the headphone input. Besides, the system allows you to control the microphone volume, which saves you great time during the editing process. 

The 2x TX units and 1x RX units do not possess built-in batteries. Instead, they operate through external 2x AAA batteries. Each unit when supplied with a new set of batteries can run up to 6 hours. Also, the package includes all the vital components, including shoe mount, belt clips, and lapel mics for discreet audio recordings. What’s more? The package provides TRS and TRRS cables for tablets, smartphones, and cameras. 

Key Specifications of the MOVO WMX-1

  • TX and RX weigh 47 grams (without batteries)
  • 2.4GHz wireless technology
  • Up to 6 hours of battery life (TX and RX)
  • Powered by 2x AAA batteries
  • 35Hz to 14kHz frequency response
  • -30dB microphone sensitivity
  • 84dB signal-to-noise ratio
  • Omnidirectional polar pattern
  • 200 feet wireless range

Pros

  • Effortless pairing and assembling
  • This wireless mic can function with older Android phones
  • No special permissions are required when using this kit in sensitive locations 

Cons

  • Some users have reported faulty buttons in the receiver
  • The transmitters don’t work individually as a microphone (lav mics are necessary)
  • AAA batteries in both TX and RX drain soon, adding external expense and inconvenience for users

Price

  • $79.95 (As seen on Amazon)

12. SmallRig Forevala W60

image 533

The SmallRig Forevala W60 is a user-friendly wireless microphone best for interviews. The construction includes a digital screen on both transmitter and receiver that displays battery status, sound levels, and current mode of recording. The system functions on a 2.4GHz wireless frequency and covers a distance of up to 328 feet at a low latency of 10ms. 

The kit offers DSP technology with 48kHz/16-bit resolution that helps preserve ambient noise and nuances of speech. And like most microphones, it’s a 2-person system that allows you to interview two people simultaneously. The product also offers mono and stereo recording modes that can be attained with a single click. Moreover, this wireless microphone has a dedicated volume control on each transmitter. 

Besides, both TX units feature a low-cut filter button to reduce wind and other low-frequency unwanted sounds. This ensures clean audio recordings so you can spend less time on editing. The SmallRig Forevala W60 units have built-in lithium batteries that operate for up to 8 hours. Also, the setup is quite simple and easy. 

Key Specifications of the SmallRig Forevala W60

  • 2.4GHz wireless technology
  • 328ft wireless range
  • TX/RX battery life of up to 8 hours
  • 1.5 hours RX charging time
  • 1 hour TX charging time

Pros

  • Crystal clear display screen 
  • It has an uncomplicated menu for beginners

Cons

  • Not enough information available online
  • The receiver knob and clip are not up to the mark
  • The microphone is not made for professional interviewers
  • Users have experienced compatibility issues with cameras

Price

  • N/A 

13. RODE Interview Pro

AD 4nXeS9cWXrShfyDhr0RItm9siASjC9 q8jnkmq3pgCFvXTkn4zgGSRAUwVSyDoXVlWXV9 kOfARQ0HR00e816yD

The RODE Interview Pro is a handheld wireless microphone for capturing high-quality audio. It is a newly launched 2024 model for content creators and media persons. This mic’s notable and beneficial functionality is its compatibility with a range of RODE wireless receivers. You can integrate it with Wireless ME, Wireless PRO, and Wireless GO II RX units for wireless audio transmission. This allows you to record broadcast-standard sound directly into your computer, smartphone, and camera. Moreover, you can also connect it to the RODE Caster Duo and Pro II. This additional support lets you use this mic even for podcasts.

The RODE Interview Pro uses 2.4Ghz digital transmission technology and offers up to 656ft (200 meters) of wireless range. Digging deep into this model, you get an omnidirectional condenser capsule made with high-quality materials for recording neat audio with a bit of crunchiness. While its pickup pattern naturally captures sounds from all directions, the mic primarily focuses on the main sound source. This lets you experience minimal interruption due to noise while recording a person. Additionally, this wireless handheld RODE microphone includes a built-in shockmount, windshield, and pop filter for reducing handling, wind, and plosive sounds. 

Another interesting feature of the RODE Interview Pro is its onboard recording at 32-bit float. This parameter performs two operations. First, it serves as a correcting tool for recordings that sound too quiet or loud. Second, this function can record audio without pairing it to a wireless receiver. This is an exceptional quality, especially for crowded or silent zones where signals are weak or unavailable. 

The Interview Pro wireless handheld mic has a 40-hour onboard recording time with a battery life of up to 25 hours. It also offers 128-bit encryption to ensure stable and secure wireless connectivity. This technology keeps your recordings clear and even safeguards them from signal interference. 

Key Specifications of the RODE Interview Pro

  • 250 grams of weight
  • Omnidirectional polar pattern
  • Up to 25 hours of battery time
  • 2.4Ghz wireless connectivity
  • 656ft wireless range
  • 20Hz to 20kHz frequency response
  • 74dB signal-to-noise ratio

Pros

  • It has a fast pairing process
  • This wireless microphone has a modern look compared to traditional handheld interview mics
  • The mic performs exceptionally well for interviews, especially those recorded using a camera

Cons

  • You may experience feedback issues at some frequencies
  • It is not a suitable microphone for live events where there are big speakers, as the mic is likely to capture environmental sounds

Price

  • $249.00 (As seen on Amazon)

14. MAYBESTA WM350

AD 4nXdjYbNjjf5wKQIaqxH INRovO6wqa6zkxdPjg4YddmrPpRR4MaIhdlIWtxrn7JZYM9TGW668be2L8dF1tchT1O FEB

This is the MAYBESTA WM350 wireless Bluetooth lavalier microphone for interviews, podcasts, and more. One of the best things about this microphone is that you don’t have to use adapters or third-party applications, or turn on your phone’s Bluetooth feature to record interviews. All you need to do is attach the RX to your recording device and wear the TX. You are all set to record your subject since the units automatically pair. 

The MAYBESTA WM350 comes with 2x TX and 1x RX units. The transmitters have an omnidirectional polar pattern. You can expect detailed audio quality on recordings, as the TXs have a high sensitivity and are internally housed with a spray-proof sponge. This MAYBESTA wireless mic is made with the DSP chip to provide advanced noise reduction. Therefore, this microphone can minimize background noises for higher sound quality. Now, this is a great trait, especially if you’re more into outdoor interviews. 

Each transmitter and receiver includes a 65mAh rechargeable battery. This lets you experience seamless audio recording for up to 4.5 hours. You can also change the TX and RX units, and it only takes 2 hours to fully charge both of them. Besides, the RX unit has a USB-C port in which you can insert the USB-C cable with a lightning adapter to recharge your phone at the same time. 

Nevertheless, the MAYBESTA WM350 is only made for iPhone and iPad users with a lightning port. You may not be able to use this microphone with Androids, iPhone 15, or any other USB-C port devices, even with the adapter. But on the bright side, this microphone is an inexpensive way for iOS users to record effective audio for interviews.

Key Specifications of the MAYBESTA WM350

  • 20-gram TX weight
  • Omnidirectional polar pattern
  • Bluetooth wireless connectivity
  • 50ft wireless range (as mentioned on Amazon)
  • TX battery life up to 4.5 hours
  • TX charging time is around 2 hours
  • 80dB signal-to-noise ratio

Pros

  • The sound quality is fair for the price
  • Noise reduction feature has a decent effect on the overall audio
  • Both TX units are easy to clip and light to wear on your clothes

Cons

  • Only works with older iPhones and iPad models with lightning connectivity
  • The mismatched information related to the wireless range may confuse users
  • The product’s model is not available on the official site, which may raise questions for some users
  • No creativity in the design – Most MAYBESTA microphones look similar, which can also be puzzling for users

NOTE: According to the Amazon store, the MAYBESTA WM350 can wirelessly cover up to 50 feet of distance. This means you can record interviews and other sounds within this range, whether indoors or talking to the interviewees on the streets. However, there is a conflict between the wireless ranges since, upon receiving the package, the box shows 65 feet as its standard wireless range. Therefore, we advise users to expect a 50ft or below transmission range if opting for this MAYBESTA microphone. 

Price

  • $20.79 (As seen on Amazon)

15. Boya BY-XM6-S2 

Boya BY-XM6-S2 

Boya BY-XM6-S2 has a simple and beautiful design making it to this list of the best wireless microphone for interviews. This microphone is a great pick if you plan to have walking interviews. So no wonder why this device is a perfect choice for capturing documentary interviews.

Boya BY-XM6-S2 is a 2-person mic system with two lavalier clip-on microphones. Additionally, both mics/transmitters are automatically paired with the receiver, saving you big time reading the ‘how to pair’ manual. More to that, both mics can be protected through the windshield clips to ensure you record a clean sound. 

And just like the Lark M2, this wireless microphone use the Adaptive Frequency Hopping technology to ensure consistent audio transmission. Also, this kit includes low-noise and Hi-Fi audio processing. This feature helps you enjoy well-balanced audio while you’re interviewing your subjects. 

Another characteristic that makes BY-XM6-S2 the best wireless microphone for interviews is the OLED display. It represents an audio waveform when the interviewee is talking, assuring you that there are no obstacles in receiving signals. 

Key Specifications of the Boya BY-XM6-S2

  • Omnidirectional mic
  • 84dB SPL
  • 2.4GHz transmitting frequency
  • 328ft recording range
  • Up to 7 hours of recording time
  • Built-in headphone jack for live sound monitoring

Pros

  • Adjustable gain with plug-and-play functionality
  • Compatible with smartphones and DSLRs

Cons

  • Signals drop when you are getting closer to the recommended range (328ft)

Price

  • $169.95

16. Movo WMX-2 Duo 

Movo WMX-2 Duo

Movo WMX-2 Duo is another best wireless microphone for interviews in this list. It consists of one receiver and two transmitters packed inside a charging case made of hard plastic. Each transmitter has mute, set, and back buttons. Above both transmitters rests an omnidirectional microphone along with a 3.5mm jack for mic connection. 

Contrarily, the receiver consists of two 3.5mm jacks. One can be used for headphones for sound monitoring and the other for audio output. There’s also an LED light and power button placed on the charging case to ensure the system is charging correctly. 

Movo WMX-2 Duo also has an easy and clean interface. But the power and mute buttons are the same on the receiver. You may need some time to get familiar with their handling. Overall, it is an outstanding lavalier microphone for recording mighty fine sound in mono or stereo modes. 

Key Specifications of the Movo WMX-2 Duo

  • 2.4GHz highly-stable transmission
  • Omnidirectional microphone
  • Recording range up to 328ft
  • 7-hours battery time
  • USB Type C port

Pros

  • Solid design 
  • Dual recording modes
  • 28 grams lightweight mic
  • 1.25-inch OLED display screen
  • Clean and crisp sound recordings
  • Compatible with smartphone, mirrorless, and DSLR cameras

Cons

  • Low build quality of charging case

Price

  • $119.95 (As seen on Amazon)

17. Leettus 2Pcs Wireless Microphone (Model: K3)

AD 4nXdEfBf1VaPfenz0z MzZ3w0YKSvIv

The Leettus wireless lav microphone system is made for content creation. That is why the manufacturer has advertised its applications for a variety of tasks, including interviews. The mic comes with 4x spong heads and 2x covers to windproof the system. These added accessories make this mic workable in different environments, especially if there’s windy weather out there. 

It consists of a built-in noise-reduction functionality that effectively keeps away low-frequency noises so that your high-frequency voices stay pure and clear. The battery life of Leettus K3 is quite impressive, especially at the offered price. The transmitter (TX) unit of this microphone works for up to 7 hours on a fully charged internal battery. Contrarily, the receiver (RX) uses the device’s battery to stay functional. It is because the RX has a charging port that makes the unit active even if you’re simultaneously charging it.

This 2-piece wireless mic from Leettus offers an easy setup process. All you need to do is plug the RX into your iOS device (only devices with a lightning port) and turn on the TX unit. Both units automatically pair and are ready to record up to two people’s voices simultaneously.

However, you should know that this Leettus microphone does not work with USB-C devices, including iPhone 15 and Android smartphones and tablets. So, if you have an iPhone 7 to iPhone 14 series or iPad model with a lightning port, this microphone can help you record interviews in stellar audio quality. 

Although it is made for selected iOS devices, users have a high demand for this product. Due to its low price, this microphone is recognized among Amazon’s Choice. With over 1,500+ user ratings, this 2x TX and 1x RX wireless mic kit has thousands of units sold so far. 

Key Specifications of the Leettus 2Pcs Wireless Microphone (Model: K3)

  • Omnidirectional polar pattern
  • 65ft wireless transmission range
  • Up to 7 hours of TX battery life
  • 20Hz to 20kHz frequency response
  • 68dB signal-to-noise ratio

Pros

  • It has a well-balanced, rich, and clear audio quality 
  • Users praise its wireless reliability and stable connectivity with minimal signal interference
  • There are fewer controls on the units, which are placed intuitively for fast settings adjustments without stopping the interview recording

Cons

  • Not designed for Android users
  • You cannot use this microphone with iPhone 15
  • Some users seem unpleased with the 65ft wireless range – they think it’s not enough
  • The manufacturer has no official site, and its Amazon store misses some important information about the factors

Price

  • $15.98 (As seen on Amazon)

18. Ulanzi V6 (A2020GBB1)

AD 4nXeIY fBFQP0ZtgxnuxvDqjWnBpNuVS3FHhuom52oIS fIeqYWfPAQEbUov8wicVyotlpCVJ4tM33rpwrQKL GQ74Ms8Yber5tN7HHVSN3eJ nJIimmusJ0SF35c2wH lirg4L7FbRr3JfaEASyA3KWd7ViC?key=UYjKRXyp1uNsCG8MnLzE0Q

The first look at the Ulanzi V6 can give anyone a sense that it has an extremely straightforward design. With simple buttons, connectors, and ports, this wireless microphone can be used with Android mobiles, iPhones, and cameras without needing apps or enabling your device’s Bluetooth. Yes, you read that right!

The V6 is compatible with old and latest iPhones (iPhone 15), Android phones, iPads, tablets, PCs, and cameras. You can connect the RX to your device using 3.5mm, lightning, or type-C ports. Thanks to its 3-in-1 receiver and dual transmitters, which connect automatically once the units are turned on. This convenience allows you to experience a quick and effortless setup. 

And since there are two TXs in the box, you can use them to record audio of two people at the same time. While this feature is found in most wireless microphone kits, having it in the V6 ensures you can use the microphone to conduct interviews or make collaborative content. You can also use one transmitter for backup purposes if the active one runs out of battery, so you know you won’t miss the chitchat with your audience. 

The Ulanzi V6 claims to provide an obstacle-free wireless range of up to 164ft (50 meters). Moreover, it uses 2.4Ghz license-free wireless connectivity, ensuring stable transmission. This wireless interview microphone lets you monitor audio in real time. To use this feature, all you need to do is press the volume button to hear the subjects/interviewees’ voices as they speak. This allows you to make quick adjustments to your recordings to achieve desired results.

The Ulanzi V6 has a battery life of 6 hours. But you can also use it for continuous recordings while charging it through the USB-C cable. Besides, the transmitter only weighs around 8 grams, which makes it feel light when clipped on your clothing. 

Key Specifications of the Ulanzi V6

  • 8-gram TX weight
  • 16-gram RX weight
  • Omnidirectional polar pattern
  • 2.4Ghz wireless connectivity
  • 164ft wireless range
  • 6 hours of TX battery life
  • 10.5 hours of RX battery life
  • 1.3-hour (approx.) TX charging time
  • 2-hour RX charging time
  • 20Hz to 20kHz frequency response
  • 64dB signal-to-noise ratio

Pros

  • The sound quality is impeccable for the price
  • It has a plug-and-play configuration without the complicated process
  • The recording range is far better than most low-priced microphones
  • The USB-C and 3.5mm TRS cables are included in the package

Cons

  • The noise-canceling feature may not work effectively in extremely noisy environments

Price

  • $39.95 (As seen on Amazon)

19. Caiord J6

AD 4nXfGLO 5OX1vPyDB6FBp fCdFn7SnlDs5EzAXB0KWGA4lL40NBL6AqQRy0GnECBRtsbEpwsWU9nYpHV3l teLnK KUOee6WydbuMf1FOIAA5e1jM2MIHkpdteibq N7kA9dF7zYdSy2owNPHEd2RaUa4uraM?key=UYjKRXyp1uNsCG8MnLzE0Q

The Caiord J6 is a round-shaped 2.4Ghz wireless microphone. Its plug-and-play system makes it suitable for capturing high-quality audio for interviews, voiceovers, podcasts, and more. It does not require any third-party programs for audio recording or an enabled Bluetooth to make a connection. Instead, all you need to do is attach the RX to your device and power on the TX to record audio. 

The Caiord J6 captures sound neatly, which is close to professional-grade quality. The big applause goes to the makers for adding a 48kHz sample rate and 24-bit depth elements to this budget-friendly wireless microphone. By default, the Caiord J6 stops background noise from intruding on the main audio file. This is due to the signal-to-noise ratio it comes with. Likewise, this wireless interview microphone can handle high sound pressure levels. So, if any of your interviewees have a loud voice or screams out of excitement, relax. This mic won’t let the high-pitched sounds destroy your audio content. 

The Caiord J6 has two important technologies instilled in the design. The first one to mention is the active noise cancellation chip that activates with a single button press. Similarly, the microphone has a built-in DSP chip that stablizes the transmission quality even if you’re consuming the entire wireless range of up to 165ft.

Each of its microphone transmitters comprises an omnidirectional polar pattern with an integrated battery with a 6-hour runtime. Additionally, the J6 2x transmitter units have a visual dial so you can stay updated with the current status of connectivity and battery. You can also view the mute and noise reduction activation status through the dial.

Compatibility-wise, the Caiord J6 goes with various devices, including cameras, Android devices, iPhones, iPads, and computers. It functions well with Android 3.0 and iOS 6.0 (and above) versions. However, the company has emphasized its use with lightning devices in the iOS realm, and its workability with iPhone 15 is still unconfirmed. 

Key Specifications of the Caiord J6

  • 95dB SPL
  • Omnidirectional polar pattern
  • 2.4Ghz transmission technology
  • Up to 165ft wireless range
  • Up to 6 hours of TX/RX battery life
  • 60db signal-to-noise ratio

Pros

  • The microphone can record soft and natural sound for interviews without adding a robotic effect
  • The control system has user-friendly icons, allowing users to easily pair and view status

Cons

  • Noise cancellation is not as effective as marketed by the manufacturer
  • Many users have complained that the RX unit does not correctly fit into smartphones with cases

Price

  • $49.99 (As seen on Amazon)

20. Rythflo LM02

AD 4nXewXs6dYowyqC6MtX9txseiKBLVzZf2Uipk2 RZP96J3muD3UVVQXA4vQaguyjLlczTgvhql yVs39kSTuyewoez0NIUaWvguanSBbF5 C1T7xQNyxzEAb9W8el6j5oV35f0tEK x4

The Rythflo LM02 is a 2-person wireless microphone for interviews, podcasting, and streaming. It delivers acoustic-grade recording at 48kHz/24-bit audio quality, making every word and note sound clear. That is why many mobile phone users have this device for presentations and video recordings. 

Unlike big and bulky microphones, the Rythflo LM02 is compact and lightweight. Its size is small enough to fit your pocket effortlessly, making it a good travel buddy for on-the-go interviews. You may also notice that its design resembles the Hollyland Lark M2. Although not sleek and professional like the Lark M2, it does let you stick personalized smiling stickers. It also provides two mounting options. You can use the back clips to attach the TX to your clothing. Contrarily, you can clip the mic on your shirt through the magnetic attachment. 

Moreover, the LM02 features double noise cancellation technology with a dedicated button to activate and deactivate the function. The built-in noise-canceling chip and the windscreen accessory combine to keep your audio clean in noisy environments. 

One of the most attractive features of the Rythflo LM02 is its long battery life when used inside the charging case. You can enjoy up to 23 hours of non-stop recording when the units are used within the storage case. On the other hand, the microphone’s own battery life is only 6 hours. You can also monitor the battery status by viewing the LED display. This is a useful trait since it keeps you informed about the remaining battery capacity. And you can immediately put the units on charging to ensure you don’t miss an important recording.

The LM02 by Rythflo is compatible with Type-C and lightning devices. So, whether you’re an Android or iPhone user, this microphone can help you record interviews hassle-free.

Key Specifications of the Rythflo LM02

  • Omnidirectional polar pattern
  • 2.4Ghz wireless connectivity
  • 6-hour TX battery life
  • 20Hz to 20kHz frequency response
  • 65dB signal-to-noise ratio

Pros

  • Stirring sound quality and effective windscreen that protects the main audio from being infiltrated
  • Solid case and sturdy build quality, making the mic durable
  • The package includes adapters for easy connection with iPhone and Android smartphones

Cons

  • Unfortunately, the company hasn’t mentioned information related to the wireless range, which may put interested people in doubt
  • Not a true polar pattern wireless mic – some users have reported that the polar pattern does not effectively pick up sounds from all directions

Price

  • $89.99 (As seen on Amazon)

21. Hohem MIC-01

AD 4nXdsixzgDoVz R9ZJfvwzIirsBxkVpSMVyjR9LpqVppFyjPUogncPqJ1I3oNje FeOQ

The Hohem MIC-01 attracts users with its blazing design and passable features, making it suitable for recording interviews wirelessly. However, it does offer more than just appearance. This microphone provides a long wireless range of up to 100 meters (328ft) and can capture audio in superior quality. That is why you can rely on this device for both indoor and outdoor usage. 

The Hohem MIC-01’s battery life is up to 7.5 hours, allowing you to enjoy a full-day interviewing session. On the other hand, you can use the microphone with its fully-charged storage case to extend the runtime to 20 hours. Plus, each TX and RX unit holds a USB-C port that lets you charge the units while recording audio. 

This wireless microphone delivers sound at a 48kHz/16-bit audio sample rate. While compared to the 24-bit bit depth, 16-bit may not provide a pristine audio level. However, you can expect transparent sound that is competent in contrast to many budget-saver mics. 

The inclusion of an onboard recording feature is an added bonus! You can also use the TX as a recorder and save audio files on a TF card. This makes Hohem MIC-01 a flexible device that caters to different recording environments. But that’s not the end! This wireless microphone kit offers wireless control for your mobile phone recordings. You can use this functionality to record videos with rich audio quality, even from a long distance. 

And if you’re worried about the compatibility, you shouldn’t be. Because the Hohem MIC-01 is available in Type-C and Lightning connectors. You can pick the variant that suits most of your devices. However, the price may vary depending on your selected version.

Key Specifications of the Hohem MIC-01

  • 14.9-gram TX weight
  • 5-gram RX weight
  • Omnidirectional polar pattern
  • 2.4Ghz wireless connectivity
  • 328ft wireless range
  • 1.5-hour TX/RX charging time
  • 20Hz to 20kHz frequency response
  • -38dBFS microphone sensitivity
  • 64dB signal-to-noise ratio

Pros

  • Switchable noise-canceling and reverb feature
  • The TX and RX units are housed in a robust charging case
  • One-click power button press to initiate the recording

Cons

  • You need to speak closer into the mic for better audio clarity
  • Some users have reported that the claimed real time monitoring feature doesn’t perform well

Price

  • $109.00 (2TX 1RX Type-C variant on Amazon)
  • $119.00 (2TX 1RX Lightning variant on Amazon)

Factors to Consider when Choosing the Best Wireless Microphone for Interviews

Here are the 10 essential factors discussed briefly to help you purchase the best wireless microphone for interviews.

a. Portability

Your wireless interview microphone should be lightweight so you can grab the system and do your job hassle-free. Both the TX and RX should be a few grams heavy so you and the interviewee can be comfortable. It is important to realize that if the kit, especially the transmitters are heavyweight, you won’t be able to carry them and the subject may feel tired during long interview sessions.

b. Wireless Connectivity

In wireless interview microphones, there are two prominent technologies that connect the transmitter with the receiver. These are the Bluetooth or 2.4GHz spectrum. However, most manufacturers utilize the 2.4GHz frequency since it ensures reliable connectivity compared to Bluetooth. Nevertheless, some microphones also have dual wireless connectivity options. So if one fails to work in a certain environment, the other comes to the rescue.

c. Wireless Range

Since you want a wireless mic for conducting interviews, you should know what type of range is suitable. For instance, if you’re recording a face-to-face, seated interview in a studio, a 300ft range will do the job. Contrarily, if you are into outdoor or street interviews where you interact with the public, you should go for a higher range. Ideally, you should pick a wireless mic that offers a range between 600ft and 1000ft. 

d. Battery Life

Most wireless mics have built-in lithium batteries in the TX and RX units. They require charging to stay functional. So choose a device that has a long battery time and takes minimal time to recharge. A wireless mic that lasts up to 7 to 10 hours on a single recharge of approximately 2 hours or less is a perfect option. 

e. Compatibility

Some locations are not made for using heavy recording equipment. Therefore, your wireless microphone should be able to work with cameras/DSLRs, smartphones, and PCs. This will give you the flexibility of using the mic on different devices. Moreover, you won’t have to purchase multiple microphones to make them functional with all of your recording gear. So, pick a device that offers an all-in-one solution.

f. Interference Resistance

Interference resistance refers to features or technologies in wireless microphones that ensure clear audio transmission in crowded or congested recording environments. These technologies help mitigate any signals that are likely to interfere with your audio recording. 

Professional creators prefer microphones with Adaptive Frequency Hopping (AFH) and Digital Signal Processing (DSP) technologies, as they enhance the overall quality of your recorded audio. If you can’t find both in a single device, then try your best to choose a brand with at least one of these traits. 

g. Frequency Response

Frequency response ensures accurate reproduction of recorded sounds. A wider range of frequencies helps you record audio in detail and with high clarity. So, choose a microphone that offers 20Hz to 20kHz of frequency response. 

h. Signal-to-Noise Ratio

The signal-to-noise ratio (SNR) defines how good a mic is at reducing background noises and increasing the clarity of recorded audio. There are different ranges of SNR, but good brands at least provide 70dB for optimal performance. 

i. Easy Setup

Be free to judge a wireless microphone for interviews based on how easy its setup is. Consider straightforward configuration and user-friendly controls over complicated menu systems, as these features will help you quickly prepare the mic to conduct interviews without keeping the interviewee waiting. 

j. Price

Lastly, the price of a wireless mic does matter. If your pockets are tight, look for mid-priced microphones, as some of them have more options than pricey mics. And if you find a brand that is surprisingly low priced and claims to provide loads of features, make sure to research its pros and cons, and evaluate user reviews. 

Conclusion

A good wireless microphone will attract more audience to your content when you’re niche is interviewing strangers and well-known personalities. Among the list of the 21 best wireless microphones for interviews, the Hollyland Lark M2, Lark M1, and Hollyland Lark Max have won the hearts of thousands of creators due to their balanced features, specifications, and affordable pricing range. Conversely, the Rode Wireless Go II, DJI Mic 2, and Shure MoveMic are some cool options but they are expensive products. However, compared to these high-priced and other mid and low-priced brands, such as Synco G2A2 and Comica VM30, the Hollyland wireless mics have more to offer in many domains. 

Frequently Asked Questions about Best Wireless Microphones for Interview

Q1. What type of mic is best for interviews?

Wireless lavalier are the best microphones for interviews because they have an easy setup and have lots of options for audio adjustment.

Q2. Which brand of wireless microphone is best?

Some popular wireless mic brands for interview are Hollyland Lark  M2, Hollyland Lark Max, Rode Wireless Go II, and DJI Mic 2.

Q3. Which microphones are used mostly for interviews because they are small enough to be unnoticed?

The Hollyland Lark M2 is a lightweight wireless microphone. The transmitter weighs around 9 grams whereas the receiver weighs 14.8 grams, making them ideal for discreet use during interviews.

Share:

Facebook
Twitter
Pinterest
LinkedIn
Picture of Ahsen Jawed

Ahsen Jawed

Hi, I am Ahsen, a tech admirer who keeps an eye on the latest innovations and upgrades in the world of microphones, cameras, and all other digital products which add joy and ease to our lives. As a content writer for over a decade, I adore describing inventions and new technologies in filmmaking and content creation. I aim to help readers make sound decisions by letting them explore popular brands through simple and understandable content backed by years of experience and knowledge.

Table of Contents

Related Posts