Interface Connection & Installation introduction

March 27, 2023

OVERVIEWS: Mars 4k has rich interface, this article shows the usage of all the interface for your reference.

Transmitter Connection

mceclip0.png
No.StatusDetail
Mirrorless cameraSONY, Canon, Fujifilm, Nikon and others
CameraPanasonic, SONY
Professional video cameraARRI、RED、SONY
USB chargerThe charger must be 5V2.5A or above, 5V1A/2A power supply is insufficient, and device will not work properly
USB flash driveUpgrade via USB C flash drive / USB flash drive+ Type C  conversion
1/4 Cold shoeThe device can be mounted on the hot shoe mount of the camera
NP-F BatteryF970,F750,F550
D-Tap adapter cableAble to connected to V-Mount/G-Mount battery
12V DC adapterAll Mars Series wireless transmission DC adapters are common

Receiver Connection

mceclip1.png
No.StatusDetail
MonitorSmall or large monitor are supported
Switcher/directorBMD、SONY、Panasonic and other switchers are supported
Video capVideo capture card/encoderSupported by all capture cards
USB chargerThe charger must be 5V2.5A or above, 5V1A/2A power supply is insufficient, and device will not work properly
USB flash driveUpgrade via USB C flash drive / USB flash drive+ Type C  conversion
TripodThe receiver (RX) must be on tripod, at least 1.7 meters high, to avoid obstruction
NP-F BatteryF970,F750,F550
D-Tap adapter cableAble to connected to V-Mount/G-Mount battery
12V DC adapterAll Mars Series wireless transmission DC adapters are common
Article Number: 【AS-220824001_6】

RELATED POSTS